jrandom authored 19 years ago and zzz committed 19 years ago

    * Run the peer profile coalescing/reorganization outside the job queue
      (on one of the timers), to cut down on some job queue congestion.  Also,
      trim old profiles while running, not just when starting up.
    * Slightly more sane intra-floodfill-node netDb activity (only flood new
      entries)
    * Workaround in the I2PTunnelHTTPServer for some bad requests (though the
      source of the bug is not yet addressed)
    * Better I2PSnark reconnection handling
    * Further cleanup in the new tunnel build process
    * Make sure we expire old participants properly
    * Remove much of the transient overload throttling (it wasn't using a good
      metric)

cervantes authored 19 years ago and zzz committed 19 years ago

	* Removed entirely misleading memory status from the console summary.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Add a new Status: line on the router console - "ERR-ClockSkew", in case
      the clock is too skewed to do anything useful (check the year and month,
      not just the hour and minute).
    * Fixed the read/write timeouts in the streaming lib (so that it actually
      honors them now)
    * Minor I2PSnark cleanups (no read timeout, more careful shutdown and
      torrent closing)
    * Handle an oddball tunnel creation failure (thanks Xunk)

mihi authored 19 years ago and zzz committed 19 years ago

[yes, i am still alive *g*]

jrandom authored 19 years ago and zzz committed 19 years ago

    * Added a first pass to the I2PSnark web UI (see /i2psnark/)

polecat authored 19 years ago and zzz committed 19 years ago

Navbar is now customizeable via docs/toolbar.html.  There is a default should that file not be there.  And... wtf, didn't my syndie thumbnail patch take? Well, no conflicts reported so, here it goes again.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Create different strategies for exploratory tunnels (which are difficult
      to create) and client tunnels (which are much easier)
    * Gradually increase number of parallel build attempts as tunnel expiry
      nears.
    * Temporarily shorten attempted build tunnel length if builds using
      configured tunnel length are unsuccessful
    * React more aggressively to tunnel failure than routine tunnel
      replacement
    * Make tunnel creation times randomized - there is existing code to
      randomize the tunnels but it isn't effective due to the tunnel creation
      strategy. Currently, most tunnels get built all at once, at about 2 1/2
      to 3 minutes before expiration. The patch fixes this by fixing the
      randomization, and by changing the overlap time (with old tunnels) to a
      range of 2 to 4 minutes.
    * Reduce number of excess tunnels. Lots of excess tunnels get created due
      to overlapping calls. Just about anything generated a call which could
      build many tunnels all at once, even if tunnel building was already in
      process.
    * Miscellaneous router console enhancements

jrandom authored 19 years ago and zzz committed 19 years ago

    * Inlined the Syndie CSS to reduce the number of HTTP requests (and
      because firefox [and others?] delay rendering until they fetch the css).
    * Make sure we fire the shutdown tasks when regenerating a new identity
      (thanks picsou!)
    * Cleaned up some of the things I b0rked in the 'dynamic keys' mode
    * Don't drop SSU sessions if they're still transmitting data successfully,
      even if there are transmission failures
    * Adjusted the time summarization to display hours after 119m, not 90m
    * Further EepGet cleanup (grr)

jrandom authored 19 years ago and zzz committed 19 years ago

    * Added support for 'dynamic keys' mode, where the router creates a new
      router identity whenever it detects a substantial change in its public
      address (read: SSU IP or port).  This only offers minimal additional
      protection against trivial attackers, but should provide functional
      improvement for people who have periodic IP changes, since their new
      router address would not be shitlisted while their old one would be.
    * Added further infrastructure for restricted route operation, but its use
      is not recommended.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Add filtering threads by author to Syndie, populated with authors in the
      user's addressbook
    * When creating the default user, add
      "http://syndiemedia.i2p/archive/archive.txt" to their addressbook,
      configured to automatically pull updates.  (what other archives should
      be included?)
    * Tiny servlet to help dole out the new routerconsole themes, and bundle
      the installer/resources/themes/** into ./docs/themes/** on both install
      and update.

jrandom authored 19 years ago and zzz committed 19 years ago

    * First pass to a new threaded Syndie interface, which isn't enabled by
      default, as its not done yet.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Include SSU establishment failure in the peer profile as a commError,
      as we do for TCP establishment failures.
    * Don't throttle the initial transmission of a message because of ongoing
      retransmissions to a peer, since the initial transmission of a message
      is more valuable than a retransmission (since it has less latency).
    * Cleaned up links to SusiDNS and I2PTunnel (thanks zzz!)

dust authored 19 years ago and zzz committed 19 years ago

    * Merge sucker into syndie with a rssimport.jsp page.
    * Add getContentType() to EepGet.
    * Make chunked transfer work (better) with EepGet.
    * Do replaceAll("<","&lt;") for logs.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Improved the bandwidth throtting on tunnel participation, especially for
      low bandwidth peers.
    * Improved failure handling in SSU with proactive reestablishment of
      failing idle peers, and rather than shitlisting a peer who failed too
      much, drop the SSU session and allow a new attempt (which, if it fails,
      will cause a shitlisting)
    * Clarify the cause of the shitlist on the profiles page, and include
      bandwidth limiter info at the bottom of the peers page.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Bugfix for the auto-update code to handle different usage patterns
    * Decreased the addressbook recheck frequency to once every 12 hours
      instead of hourly.
    * Handle dynamically changing the HMAC size (again, unless your nym is
      toad or jrandom, ignore this ;)
    * Cleaned up some synchronization/locking code

jrandom authored 19 years ago and zzz committed 19 years ago

2005-10-07  jrandom
    * Include the 1 second bandwidth usage on the console rather than the
      1 minute rate, as the 1 second value doesn't have the 1m/5m quantization
      issues.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Support noreseed.i2p in addition to .i2pnoreseed for disabling automatic
      reseeding - useful on OSes that make it hard to create dot files.
      Thanks Complication (and anon)!
    * Fixed the installer version string (thanks Frontier!)
    * Added cleaner rejection of invalid IP addresses, shitlist those who send
      us invalid IP addresses, verify again that we are not sending invalid IP
      addresses, and log an error if it happens. (Thanks Complication, ptm,
      and adab!)

jrandom authored 19 years ago and zzz committed 19 years ago

2005-09-29  jrandom
    * Let syndie users modify their metadata.
    * Reseed the router on startup if there aren't enough peer references
      known locally.  This can be disabled by creating the file .i2pnoreseed
      in your home directory, and the existing detection and reseed handling
      on the web interface is unchanged.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Reworded the SSU introductions config section (thanks duck!)
    * Force identity content encoding for I2PTunnel httpserver requests
      (thanks redzara!)
    * Further x-i2p-gzip bugfixes for the end of streams
    * Reduce the minimum bandwidth limits to 3KBps steady and burst (though
      I2P's performance at 3KBps is another issue)
    * Cleaned up some streaming lib structures

jrandom authored 19 years ago and zzz committed 19 years ago

    * Allow reseeding on the console if the netDb knows less than 30 peers,
      rather than less than 10 (without internet connectivity, we keep the
      last 15 router references)
    * Reenable the x-i2p-gzip HTTP processing by default, flushing the stream
      more aggressively.
    * Show the status that used to be called "ERR-Reject" as "OK (NAT)"
    * Reduced the default maximum number of streaming lib resends of a packet
      (10 retransmits is a bit much with a reasonable RTO)

jrandom authored 19 years ago and zzz committed 19 years ago

2005-09-17  jrandom
    * Clean up syndie a bit more and bundle a default introductory post with
      both new installs and updates.
    * Typo fixes on the console (thanks bar!)

jrandom authored 19 years ago and zzz committed 19 years ago

    * Updated the bandwidth limiter to use two tiers of bandwidth - our normal
      steady state rate, plus a new limit on how fast we transfer when
      bursting.  This is different from the old "burst as fast as possible
      until we're out of tokens" policy, and should help those with congested
      networks.  See /config.jsp to manage this rate.
    * Bugfixes in Syndie to handle missing cache files (no data was lost, the
      old posts just didn't show up).
    * Log properly in EepPost

jrandom authored 19 years ago and zzz committed 19 years ago

    * Added the i2p.exe and i2pinstall.exe for windows users, using launch4j.
    * Added runplain.sh for *nix/osx users having problems using the java
      service wrapper (called from the install dir as: sh runplain.sh)
    * Bundle susidns and syndie, with links on the top nav
    * Have I2PTunnelHTTPClient and I2PTunnelHTTPServer use the x-i2p-gzip
      content-encoding (if offered), reducing the payload size before it
      reaches the streaming lib.  The existing compression is at the i2cp
      level, so we've been packetizing 4KB of uncompressed data and then
      compressing those messages, rather than compressing and then packetizing
      4KB of compressed data.  This should reduce the number of round trips
      to fetch web pages substantially.
    * Adjust the startup and timing of the addressbook so that susidns always
      has config to work off, and expose a method for susidns to tell it to
      reload its config and rerun.

jrandom authored 19 years ago and zzz committed 19 years ago

    * More careful error handling with introductions (thanks dust!)
    * Fix the forceIntroducers checkbox on config.jsp (thanks Complication!)
    * Hide the shitlist on the summary so it doesn't confuse new users.

jrandom authored 19 years ago and zzz committed 19 years ago

    * More aggressively publish updated routerInfo.
    * Expose the flag to force SSU introductions on the router console
    * Don't give people the option to disable SNTP time sync, at least not
      through the router console, because there is no reason to disable it.
      No, not even if your OS is "ntp synced", because chances are, its not.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Test the router's reachability earlier and more aggressively
    * Use the low level bandwidth limiter's rates for the router console, and
      if the router has net.i2p.router.transport.FIFOBandwidthLimiter=INFO in
      the logger config, keep track of the 1 second transfer rates as the stat
      'bw.sendBps1s' and 'bw.recvBps1s', allowing closer monitoring of burst
      behavior.

jrandom authored 19 years ago and zzz committed 19 years ago

    * HTML cleanup for the router console (thanks!)
2005-09-07  jrandom
    * Lay the foundation for 'client routers' - the ability for peers to opt
      out of participating in tunnels entirely due to firewall/NAT issues.
      Individual routers have control over where those peers are used in
      tunnels - in outbound or inbound, exploratory or client tunnels, or
      none at all.  The defaults with this build are to simply act as before -
      placing everyone as potential participants in any tunnel.
    * Another part of the foundation includes the option for netDb
      participants to refuse to answer queries regarding peers who are marked
      as unreachable, though this too is disabled by default (meaning the
      routerInfo is retrievable from the netDb).

jrandom authored 19 years ago and zzz committed 19 years ago

    * Expose the HTTP headers to EepGet status listeners
    * Handle DSA key failures properly (if the signature is not invertable, it
      is obviously invalid)
also, syndie now properly detects whether the remote archive can send a filtered export.zip
by examining the HTTP headers for X-Syndie-Export-Capable: true.  If the remote archive
does not set that header (and neither freesites, nor apache or anything other than the ArchiveServlet will),
it uses individual HTTP requests for individual blog posts and metadata fetches.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Minor logging and optimization tweaks in the router and SDK
    * Use ISO-8859-1 in the XML files (thanks redzara!)
    * The consolePassword config property can now be used to bypass the router
      console's nonce checking, allowing CLI restarts

jrandom authored 19 years ago and zzz committed 19 years ago

    * Deployed the peer testing implementation to be run every few minutes on
      each router, as well as any time the user requests a test manually.  The
      tests do not reconfigure the ports at the moment, merely determine under
      what conditions the local router is reachable.  The status shown in the
      top left will be "ERR-SymmetricNAT" if the user's IP and port show up
      differently for different peers, "ERR-Reject" if the router cannot
      receive unsolicited packets or the peer helping test could not find a
      collaborator, "Unknown" if the test has not been run or the test
      participants were unreachable, or "OK" if the router can receive
      unsolicited connections and those connections use the same IP and port.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Display the average clock skew for both SSU and TCP connections
2005-08-07  jrandom
    * Fixed the long standing streaming lib bug where we could lose the first
      packet on retransmission.
    * Avoid an NPE when a message expires on the SSU queue.
    * Adjust the streaming lib's window growth factor with an additional
      Vegas-esque congestion detection algorithm.
    * Removed an unnecessary SSU session drop
    * Reduced the MTU (until we get a working PMTU lib)
    * Deferr tunnel acceptance until we know how to reach the next hop,
      rejecting it if we can't find them in time.
    * If our netDb store of our leaseSet fails, give it a few seconds before
      republishing.

jrandom authored 19 years ago and zzz committed 19 years ago

2005-07-27  jrandom
    * Enabled SSU as the default top priority transport, adjusting the
      config.jsp page accordingly.
    * Add verification fields to the SSU and TCP connection negotiation (not
      compatible with previous builds)
    * Enable the backwards incompatible tunnel crypto change as documented in
      tunnel-alt.html (have each hop encrypt the received IV before using it,
      then encrypt it again before sending it on)
    * Disable the I2CP encryption, leaving in place the end to end garlic
      encryption (another backwards incompatible change)
    * Adjust the protocol versions on the TCP and SSU transports so that they
      won't talk to older routers.
    * Fix up the config stats handling again
    * Fix a rare off-by-one in the SSU fragmentation
    * Reduce some unnecessary netDb resending by inluding the peers queried
      successfully in the store redundancy count.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Fix in the SDK for a bug which would manifest itself as misrouted
      streaming packets when a destination has many concurrent streaming
      connections (thanks duck!)
    * No more "Graceful shutdown in -18140121441141s"

cervantes authored 19 years ago and zzz committed 19 years ago

	* Added workaround for an odd win32 bug in the stats configuration
	  console page which meant only the first checkbox selection was saved.

2005-07-15  Romster
	* Added per group selection toggles in the stats configuration console
	  page.

jrandom authored 19 years ago and zzz committed 19 years ago

    * Within the tunnel, use xor(IV, msg[0:16]) as the flag to detect dups,
      rather than the IV by itself, preventing an attack that would let
      colluding internal adversaries tag a message to determine that they are
      in the same tunnel.  Thanks dvorak for the catch!
    * Drop long inactive profiles on startup and shutdown
    * /configstats.jsp: web interface to pick what stats to log
    * Deliver more session tags to account for wider window sizes
    * Cache some intermediate values in our HMACSHA256 and BC's HMAC
    * Track the client send rate (stream.sendBps and client.sendBpsRaw)
    * UrlLauncher: adjust the browser selection order
    * I2PAppContext: hooks for dummy HMACSHA256 and a weak PRNG
    * StreamSinkClient: add support for sending an unlimited amount of data
    * Migrate the tests out of the default build jars

2005-06-22  Comwiz
    * Migrate the core tests to junit

jrandom authored 19 years ago and zzz committed 19 years ago

    * Added a small new page to the web console (/peers.jsp) which contains
      the peer connection information.  This will be cleaned up a lot more
      before 0.6 is out, but its a start.