propagate from branch 'i2p.i2p.zzz.test' (head 0bb4b6c8acec3e78fe1d79924fef7186cfe31973)

            to branch 'i2p.i2p' (head b13b20bc5c20fd4ce45a91cacd483bc9fdea7118)

LICENSE.txt

+This product includes both public domain code and licensed code as described below.
+For all code, unless otherwise stated in the appropriate license, the following applies:
+
+
+			    NO WARRANTY
+
+  BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+
+
+LICENSES
+--------
+
+Core:
+Public domain except as listed below:
+
+   ElGamal and DSA code:
+   Copyright (c) 2003, TheCrypto
+   See licenses/LICENSE-ElGamalDSA.txt
+
+   SHA256 and HMAC-SHA256:
+   Copyright (c) 2000 - 2004 The Legion Of The Bouncy Castle
+   See licenses/LICENSE-SHA256.txt
+
+   AES code:
+   Under the Cryptix (MIT) license, written by the Cryptix team
+   (That's what our website says but all our AES code looks like it is public domain)
+
+   Crypto filters:
+   From the xlattice app - http://xlattice.sourceforge.net/
+   See licenses/LICENSE-BSD.txt
+
+   SNTP code:
+   Copyright (c) 2004, Adam Buckley
+   See licenses/LICENSE-SNTP.txt
+
+   PRNG:
+   Copyright (C) 2001, 2002, Free Software Foundation, Inc.
+   See licenses/LICENSE-LGPLv2.1.txt
+
+   GMP 4.1.3:
+   Copyright 1991, 1996, 1999, 2000 Free Software Foundation, Inc.
+   See licenses/LICENSE-LGPLv2.1.txt
+
+   HashCash code:
+   Copyright 2006 Gregory Rubin grrubin@gmail.com
+   See licenses/LICENSE-HashCash.txt
+
+
+
+Router:
+Public domain
+
+
+
+Installer:
+   Launch4j:
+   Copyright (C) 2005 Grzegorz Kowal
+   See licenses/LICENSE-GPLv2.txt
+
+   Izpack:
+   See licenses/LICENSE-Apache1.1.txt
+
+
+
+Wrapper:
+Copyright (c) 1999, 2004 Tanuki Software
+See licenses/LICENSE-Wrapper.txt
+
+
+
+Applications:
+
+   Addressbook:
+   Copyright (c) 2004 Ragnarok
+   See licenses/LICENSE-Addressbook.txt
+
+   BOB:
+   Copyright (C) sponge
+   DWTFYWTPL
+
+   I2PSnark:
+   Copyright (C) 2003 Mark J. Wielaard
+   See licenses/LICENSE-GPLv2.txt
+
+   I2PTunnel:
+   (c) 2003 - 2004 mihi
+   GPLv2 with exception.
+   See licenses/LICENSE-I2PTunnel.txt
+   See licenses/LICENSE-GPLv2.txt
+
+   I2PTunnel SOCKS Proxy:
+   Copyright (c) 2004 by human
+   GPLv2 with exception.
+   See licenses/LICENSE-I2PTunnel.txt
+   See licenses/LICENSE-GPLv2.txt
+
+   Jetty 5.1.12:
+   Copyright 2000-2004 Mort Bay Consulting Pty. Ltd.
+   See licenses/LICENSE-Apache1.1.txt
+   See licenses/LICENSE-Apache2.0.txt
+   See licenses/NOTICE-Ant.txt
+   See licenses/NOTICE-Commons-Logging.txt
+
+   JRobin 1.4.0:
+   See licenses/LICENSE-LGPLv2.1.txt
+
+   Ministreaming Lib:
+   By mihi.
+   See licenses/LICENSE-BSD.txt
+
+   Proxyscript:
+   By Cervantes.
+   Public domain.
+
+   Router console:
+   Public domain.
+
+   SAM:
+   Public domain.
+
+   Streaming Lib:
+   Public domain.
+
+   SusiDNS:
+   Copyright (C) 2005 <susi23@mail.i2p>
+   See licenses/LICENSE-GPLv2.txt
+
+   SusiMail:
+   Copyright (C) 2004-2005  <susi23@mail.i2p>
+   See licenses/LICENSE-GPLv2.txt
+
+   Systray:
+   Public domain.
+      Bundles systray4j code:
+      See licenses/LICENSE-GPLv2.txt
+
+
+
+Other Applications and Libraries
+--------------------------------
+The following applications and libraries are not used or bundled in
+binary packages, therefore the licenses are not included in binary
+distributions. See the source package for the additional license information.
+
+   Atalk:
+   Public domain
+
+   SAM C Library:
+   Copyright (c) 2004, Matthew P. Cashdollar <mpc@innographx.com>
+   See apps/sam/c/doc/license.txt
+
+   SAM C# Library:
+   Public domain.
+   See apps/sam/csharp/README
+
+   SAM Perl Library:
+   See licenses/LICENSE-GPLv2.txt
+
+   SAM Python Library:
+   Public domain.

Slackware/README

+ou will need atleast monotone > = 0.41 to get the most recent build source
+and connect it to an already running i2p router.
+
+OR:
+
+You may download the actual "stable" source from
+http://code.google.com/p/i2p/downloads/list
+
+You will need to follwing tools to build the i2p and i2p-base packages:
+
+bash >= 3.1.017
+requiredbuilder >= 0.16.3 ( http://www.stabellini.net/requiredbuilder.html )
+jre >= 6u11
+jdk >= 6u11
+apache-ant >= 1.7.1
+perl >= 5.10.0
+python >= 2.5.2
+
+Reccomended:
+monotone >= 0.41 ( http://pkgs.dr.ea.ms )
+
+See also:
+
+i2p/readme.txt
+
+AND
+
+i2p-base/readme.txt
+
+for information and handy tips.

Slackware/i2p-base/build.xml

+<?xml version="1.0" encoding="ISO-8859-1"?>
+<project basedir="." default="slackpkg">
+    <target name="slackpkg">
+        <echo message="Building Slackware package." />
+        <exec executable="./i2p-base.SlackBuild">
+        </exec>
+    </target>
+</project>

Slackware/i2p-base/doinst.sh

+#!/bin/sh
+touch /etc/rc.d/rc.local
+touch /etc/rc.d/rc.local_shutdown
+
+I2PRCA=`grep -c /etc/rc.d/rc.local -e i2p`
+I2PRCB=`grep -c /etc/rc.d/rc.local_shutdown -e i2p`
+
+echo
+
+if [ $I2PRCA -eq 0 ] ; then
+	echo "if [ -x /etc/rc.d/rc.i2p ] ; then" >> /etc/rc.d/rc.local
+	echo "        sh /etc/rc.d/rc.i2p start" >> /etc/rc.d/rc.local
+	echo "fi" >> /etc/rc.d/rc.local
+	echo "/etc/rc.d/rc.local modified."
+else
+	echo "/etc/rc.d/rc.local looks OK"
+fi
+
+if [ $I2PRCB -eq 0 ] ; then
+	echo "if [ -x /etc/rc.d/rc.i2p ] ; then" >> /etc/rc.d/rc.local_shutdown
+	echo "        sh /etc/rc.d/rc.i2p stop" >> /etc/rc.d/rc.local_shutdown
+	echo "fi" >> /etc/rc.d/rc.local_shutdown
+	echo "/etc/rc.d/rc.local_shutdown modified."
+else
+	echo "/etc/rc.d/rc.local_shutdown looks OK"
+fi
+
+if [ -f /etc/rc.d/rc.i2p ] ; then
+	if [ -x /etc/rc.d/rc.i2p ] ; then
+		chmod +x /etc/rc.d/rc.i2p.new
+	fi
+	echo
+	echo "It apears that you already have /etc/rc.d/rc.i2p"
+	echo "You may wish to replace it with /etc/rc.d/rc.i2p.new"
+	echo 
+else
+	mv /etc/rc.d/rc.i2p.new /etc/rc.d/rc.i2p
+	echo
+	echo "Installation finished. The i2p start/stop script has been"
+	echo "installed on /etc/rc.d directory. You should chmod +x"
+	echo '/etc/rc.d/rc.i2p to start it on boot.'
+	echo
+fi
+
+exit

Slackware/i2p-base/i2p-base.SlackBuild

+#!/bin/sh
+# Heavily based on the Slackware 12.1 SlackBuild
+# Slackware build script for i2p
+
+# PLEASE READ THIS:
+# Probably you will never have to update i2p packages with upgradepkg,
+# just because i2p have an auto-update function.
+# How to start i2p:
+# After installpkg command, doinst.sh will execute a postinstallation script
+# needed by i2p. After that you have to chmod +x /etc/rc.d/rc.i2p and start
+# i2p service with /etc/rc.d/rc.i2p start.
+# Now tell your browser to user this proxy: localhost on port 4444 and open
+# this page: http://localhost:7657/index.jsp
+# Here you can configure i2p, watch network status and navigate anonimously.
+# It's suggested to subscribe to various dns host, like i2host.i2p
+# For any additional information, visit i2host.i2p and forum.i2p
+
+CWD=$(pwd)
+TMP=/tmp
+PKG=/$TMP/package-base-i2p
+rm -rf $PKG
+mkdir -p $PKG
+# put here installation dir, without first and last /
+# es: usr/local
+NAME=i2p-base
+VERSION=0.0.1
+BUILD=1sim
+ARCH=noarch
+INSTALL_DIR=opt
+cd $PKG
+chown -R root:root .
+
+mkdir -p $PKG/etc/rc.d
+mkdir -p $PKG/install
+sed "s|directory|/$INSTALL_DIR/i2p/i2prouter|g" $CWD/rc.i2p_def > $PKG/etc/rc.d/rc.i2p.new
+chmod 644 $PKG/etc/rc.d/rc.i2p.new
+sed "s|directory|/$INSTALL_DIR/i2p/|g" $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+requiredbuilder -v -y -s $CWD $PKG
+makepkg -l y -c n $CWD/${NAME}-$VERSION-$ARCH-$BUILD.tgz

Slackware/i2p-base/rc.i2p_def

+#!/bin/sh
+# Start/stop i2p service.
+
+i2p_start() {
+ /bin/su - -c "( export PATH=\"$PATH:/usr/lib/java/bin:/usr/lib/java/jre/bin\"; directory start )"
+}
+
+i2p_stop() {
+ /bin/su - -c "( export PATH=\"$PATH:/usr/lib/java/bin:/usr/lib/java/jre/bin\"; directory stop )"
+}
+
+case "$1" in
+'start')
+  i2p_start
+  ;;
+'stop')
+  i2p_stop
+  ;;
+'restart')
+  i2p_stop
+  i2p_start
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+  ;;
+esac
+

Slackware/i2p-base/readme.txt

+An rc file called rc.i2p has been placed into the /etc/rc.d directory.
+If you want to change installation dir, change the variable INSTALL_DIR
+on base-i2p.SlackBuild and rebuild the package. You also will need to do the
+same for the i2p package.
+
+The install script will insert everything needed into /etc/rc.d/rc.local and
+into /etc/rc.d/rc.local_shutdown automatically.
+
+If you want to start I2P at boot you have to chmod +x /etc/rc.d/rc.i2p
+

Slackware/i2p-base/slack-desc

+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+base-i2p: base-i2p (I2P anonymizing network base config files)
+base-i2p:
+base-i2p: I2P is an anonymizing network, offering a simple layer that
+base-i2p: identity-sensitive applications can use to securely communicate. All
+base-i2p: data is wrapped with several layers of encryption, and the network is
+base-i2p: both distributed and dynamic, with no trusted parties.
+base-i2p: Many applications are available that interface with I2P, including 
+base-i2p: mail, peer-peer file sharing, IRC chat, and others.
+base-i2p:
+base-i2p: This package provides the startup files.
+base-i2p:

Slackware/i2p-base/slack-required

+bash >= 3.1.017

Slackware/i2p/build.xml

+<?xml version="1.0" encoding="ISO-8859-1"?>
+<project basedir="." default="slackpkg">
+    <target name="slackpkg">
+        <echo message="Building Slackware package." />
+        <exec executable="./i2p.SlackBuild">
+        </exec>
+    </target>
+</project>

Slackware/i2p/doinst.sh

+#!/bin/sh
+
+INST_DIR=directory
+
+( cd install
+
+echo
+for i in *.config ; {
+	if [ -f $INST_DIR/$i ] ; then
+		echo "Please check ${INST_DIR}${i}, as there is a new version."
+		cp $i $INST_DIR/$i.new
+	else
+		cp $i $INST_DIR/$i
+	fi
+}
+
+)
+
+( cd $INST_DIR
+	if [ -f blocklist.txt ] ; then
+		echo "Please check ${INST_DIR}blocklist.txt, as there is a new version."
+	else
+		mv blocklist.txt.new blocklist.txt
+	fi
+)
+
+( cd $INST_DIR/eepsite
+	if [ -f jetty.xml ] ; then
+		rm jetty.xml.new
+	else
+		mv jetty.xml.new jetty.xml
+	fi
+)
+
+( cd $INST_DIR/eepsite/docroot
+	if [ -f index.html ] ; then
+		rm index.html.new
+	else
+		mv index.html.new index.html
+	fi
+	if [ -f favicon.ico ] ; then
+		rm favicon.ico.new
+	else
+		mv favicon.ico.new favicon.ico
+	fi
+)
+
+echo
+echo "FINISHING I2P INSTALLATION. PLEASE WAIT."
+
+cd $INST_DIR
+sh postinstall.sh || (
+  echo "ERROR: failed execution of postinstall.sh. Please"
+  echo "cd into i2p installation directory and run "
+  echo "postinstall.sh manually with ./postinstall.sh"
+  exit 1
+)
+
+sleep 10
+
+sh i2prouter stop || exit 1
+
+echo
+echo "Installation finished."
+echo
+
+exit

Slackware/i2p/i2p.SlackBuild

+#!/bin/sh
+# Heavily based on the Slackware 12.1 SlackBuild
+# Slackware build script for i2p
+
+# PLEASE READ THIS:
+# Probably you will never have to update i2p packages with upgradepkg,
+# just because i2p have an auto-update function.
+# How to start i2p:
+# After installpkg command, doinst.sh will execute a postinstallation script
+# needed by i2p. After that you have to chmod +x /etc/rc.d/rc.i2p and start
+# i2p service with /etc/rc.d/rc.i2p start.
+# Now tell your browser to user this proxy: localhost on port 4444 and open
+# this page: http://localhost:7657/index.jsp
+# Here you can configure i2p, watch network status and navigate anonimously.
+# It's suggested to subscribe to various dns host, like i2host.i2p
+# For any additional information, visit i2host.i2p and forum.i2p
+
+BUILD=1sim
+
+# put here installation dir, without first and last /
+# es: usr/local
+INSTALL_DIR=opt
+NAME=i2p
+ARCH=noarch
+
+
+#
+# This mess is here due to the totally moronic way i2p does versioning.
+# We correct it here.
+#
+ROUTER=$(echo -ne "_")$(cat ../../router/java/src/net/i2p/router/RouterVersion.java | grep -e "public final static long BUILD" | cut -f2 -d"=" | cut -f1 -d";" | sed -re "s/ //g")
+if [ "$ROUTER" == "_" ] ;  then
+	ROUTER="_0"
+fi
+
+#
+# That was the easy one, now for the tough one.
+#
+
+CORE=$(cat ../../core/java/src/net/i2p/CoreVersion.java | grep -e "public final static String VERSION" | cut -f2 -d'"' | sed -re "s/ //g")
+CORE1=$(echo -n $CORE.x.x | sed -re "s/(.*)\.(.*)\.(.*)\.(.*)/\1/")
+CORE2=$(echo -n $CORE.x | sed -re "s/(.*)\.(.*)\.(.*)\.(.*)/\1/")
+
+if [ "$CORE.x.x" == "$CORE1" ] ; then
+	CORE=$(echo -ne $CORE".0.0")
+fi
+if [ "$CORE.x" == "$CORE2" ] ; then
+	CORE=$(echo -ne $CORE".0")
+fi
+
+VERSION=$(echo $CORE$ROUTER)
+#
+# Whew!
+# OK, let's build i2p
+#
+
+CWD=$(pwd)
+TMP=/tmp
+
+PKG=$TMP/package-i2p
+rm -rf $PKG
+mkdir -p $PKG
+
+cd $CWD/../../
+
+ant distclean
+ant dist
+
+
+tar xjvf i2p.tar.bz2 -C $TMP
+
+cd $TMP/i2p
+chown -R root:root .
+
+mkdir -p $PKG/$INSTALL_DIR/
+cp -a ../i2p $PKG/$INSTALL_DIR/
+
+mkdir -p $PKG/install
+mv $PKG/$INSTALL_DIR/i2p/*.config $PKG/install
+mv $PKG/$INSTALL_DIR/i2p/blocklist.txt $PKG/$INSTALL_DIR/i2p/blocklist.txt.new
+mv $PKG/$INSTALL_DIR/i2p/eepsite/jetty.xml $PKG/$INSTALL_DIR/i2p/eepsite/jetty.xml.new
+mv $PKG/$INSTALL_DIR/i2p/eepsite/docroot/index.html $PKG/$INSTALL_DIR/i2p/eepsite/docroot/index.html.new
+mv $PKG/$INSTALL_DIR/i2p/eepsite/docroot/favicon.ico $PKG/$INSTALL_DIR/i2p/eepsite/docroot/favicon.ico.new
+sed "s|directory|/$INSTALL_DIR/i2p/|g" $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cd $PKG
+requiredbuilder -v -y -s $CWD $PKG
+makepkg -l y -c n $CWD/${NAME}-$VERSION-$ARCH-$BUILD.tgz

Slackware/i2p/readme.txt

+Building:
+The i2p package will be installed in /opt/i2p 
+
+If you want to change installation dir, change the variable INSTALL_DIR
+on i2p.SlackBuild and rebuild the package. You will also need to do the same
+in the base-i2p package.
+
+Installation and Upgrade:
+Probably you will never have to update i2p packages. However if you do,
+be sure to installpkg first, then removepkg or custom config files can
+be lost with upgradepkg. I2P has an auto-update function. However using
+installpkg then removepkg lowers the demand on the I2P network as a 
+whole, and is by far faster.
+
+After installpkg command, doinst.sh will execute a postinstallation script
+needed by I2P.  Be sure to also install the base-i2p package.
+
+Optional:
+
+chmod +x /etc/rc.d/rc.i2p only if you want it to start on boot and stop on
+shutdown.
+
+How to start I2P:
+
+Start I2P service with-
+sh /etc/rc.d/rc.i2p start
+
+Now tell your browser to user this proxy: localhost on port 4444 and open
+this page: http://localhost:7657/index.jsp
+Here you can configure I2P, watch network status and navigate anonimously.
+It's suggested to subscribe to various addressbook hosts so that you can
+get to the many available eepsites and other service on I2P. These are not
+set up by default for security reasons. 
+
+Please see the faqs on http://www.i2p2.i2p/ or http://www.i2p2.de/ on how
+to subscribe to the various addressbook services.
+
+To stop I2P:
+ /etc/rc.d/rc.i2p stop
+
+
+For any additional information:
+
+Within I2P- http://www.i2p2.i2p/, http://forum.i2p/, http://zzz.i2p
+
+Internet (not reccomended!) - http://www.i2p2.de/, http://forum.i2p2.de/
+

Slackware/i2p/slack-desc

+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+   |-----handy-ruler----------------------------------------------------------|
+i2p: i2p (an anonymizing network)
+i2p:
+i2p: I2P is an anonymizing network, offering a simple layer that
+i2p: identity-sensitive applications can use to securely communicate. All
+i2p: data is wrapped with several layers of encryption, and the network is
+i2p: both distributed and dynamic, with no trusted parties.
+i2p: Many applications are available that interface with I2P, including 
+i2p: mail, peer-peer file sharing, IRC chat, and others.
+i2p: WARNING: To upgrade installpkg FIRST _THEN_ removepkg.
+i2p: For more information, see:  http://www.i2p2.de/
+i2p:

Slackware/i2p/slack-required

+glibc >= 2.7-i486-17 | glibc-solibs >= 2.7-i486-17
+perl >= 5.10.0-i486-1

apps/BOB/bob.config

+#bob.config
+#Tue Dec 30 00:00:00 UTC 2008
+# Please leave this file here for testing.
+# Thank you,
+# Sponge
+i2cp.tcp.port=7654
+BOB.host=localhost
+inbound.lengthVariance=0
+i2cp.messageReliability=BestEffort
+BOB.port=45067
+outbound.length=1
+inbound.length=1
+outbound.lengthVariance=0
+i2cp.tcp.host=localhost

apps/BOB/nbproject/private/private.properties

+compile.on.save=false
 do.depend=false
 do.jar=true
 javac.debug=true

apps/BOB/nbproject/project.properties

 application.title=BOB
 application.vendor=root
+auxiliary.org-netbeans-modules-editor-indent.CodeStyle.project.expand-tabs=false
+auxiliary.org-netbeans-modules-editor-indent.CodeStyle.project.indent-shift-width=8
+auxiliary.org-netbeans-modules-editor-indent.CodeStyle.project.spaces-per-tab=8
+auxiliary.org-netbeans-modules-editor-indent.CodeStyle.project.tab-size=8
+auxiliary.org-netbeans-modules-editor-indent.CodeStyle.project.text-limit-width=80
+auxiliary.org-netbeans-modules-editor-indent.CodeStyle.usedProfile=project
 build.classes.dir=${build.dir}/classes
 build.classes.excludes=**/*.java,**/*.form
 # This directory is removed when the project is cleaned:
@@ -30,13 +36,31 @@ file.reference.mstreaming.jar-1=../ministreaming/java/build/mstreaming.jar
 file.reference.NetBeansProjects-i2p.i2p=../i2p.i2p/
 file.reference.streaming.jar=../../bob/i2p/i2p.i2p/build/streaming.jar
 file.reference.streaming.jar-1=../streaming/java/build/streaming.jar
+file.reference.wrapper-freebsd=../../installer/lib/wrapper/freebsd/
+file.reference.wrapper-linux=../../installer/lib/wrapper/linux/
+file.reference.wrapper-linux64=../../installer/lib/wrapper/linux64/
+file.reference.wrapper-macosx=../../installer/lib/wrapper/macosx/
+file.reference.wrapper-solaris=../../installer/lib/wrapper/solaris/
+file.reference.wrapper-win32=../../installer/lib/wrapper/win32/
+file.reference.wrapper.jar=../../installer/lib/wrapper/linux/wrapper.jar
+file.reference.wrapper.jar-1=../../installer/lib/wrapper/freebsd/wrapper.jar
+file.reference.wrapper.jar-2=../../installer/lib/wrapper/linux64/wrapper.jar
+file.reference.wrapper.jar-3=../../installer/lib/wrapper/macosx/wrapper.jar
+file.reference.wrapper.jar-4=../../installer/lib/wrapper/solaris/wrapper.jar
+file.reference.wrapper.jar-5=../../installer/lib/wrapper/win32/wrapper.jar
 includes=**
 jar.compress=false
 javac.classpath=\
     ${file.reference.i2p.jar-1}:\
     ${file.reference.i2ptunnel.jar}:\
     ${file.reference.mstreaming.jar-1}:\
-    ${file.reference.streaming.jar-1}
+    ${file.reference.streaming.jar-1}:\
+    ${file.reference.wrapper.jar-1}:\
+    ${file.reference.wrapper.jar}:\
+    ${file.reference.wrapper.jar-2}:\
+    ${file.reference.wrapper.jar-3}:\
+    ${file.reference.wrapper.jar-4}:\
+    ${file.reference.wrapper.jar-5}
 # Space-separated list of extra javac options
 javac.compilerargs=
 javac.deprecation=false
@@ -58,6 +82,12 @@ javadoc.splitindex=true
 javadoc.use=true
 javadoc.version=false
 javadoc.windowtitle=
+jnlp.codebase.type=local
+jnlp.codebase.url=file:/root/NetBeansProjects/i2p.i2p/apps/BOB/dist/
+jnlp.descriptor=application
+jnlp.enabled=false
+jnlp.offline-allowed=false
+jnlp.signed=false
 main.class=net.i2p.BOB.Main
 manifest.file=manifest.mf
 meta.inf.dir=${src.dir}/META-INF

apps/BOB/src/net/i2p/BOB/BOB.java

@@ -113,6 +113,18 @@ public class BOB {
 	public final static String PROP_BOB_HOST = "BOB.host";
 	private static int maxConnections = 0;
 	private static NamedDB database;
+	private static Properties props = new Properties();
+
+
+	/**
+	 * Log a warning
+	 *
+	 * @param arg
+	 */
+	public static void info(String arg) {
+		System.out.println("INFO:" + arg);
+		_log.info(arg);
+	}
 
 	/**
 	 * Log a warning
@@ -120,7 +132,7 @@ public class BOB {
 	 * @param arg
 	 */
 	public static void warn(String arg) {
-		System.out.println(arg);
+		System.out.println("WARNING:" + arg);
 		_log.warn(arg);
 	}
 
@@ -130,7 +142,7 @@ public class BOB {
 	 * @param arg
 	 */
 	public static void error(String arg) {
-		System.out.println(arg);
+		System.out.println("ERROR: " + arg);
 		_log.error(arg);
 	}
 
@@ -146,7 +158,6 @@ public class BOB {
 		// Set up all defaults to be passed forward to other threads.
 		// Re-reading the config file in each thread is pretty damn stupid.
 		// I2PClient client = I2PClientFactory.createClient();
-		Properties props = new Properties();
 		String configLocation = System.getProperty(PROP_CONFIG_LOCATION, "bob.config");
 
 		// This is here just to ensure there is no interference with our threadgroups.
@@ -201,12 +212,13 @@ public class BOB {
 				props.store(fo, configLocation);
 				fo.close();
 			} catch(IOException ioe) {
-				warn("IOException on BOB config file " + configLocation + ", " + ioe);
+				error("IOException on BOB config file " + configLocation + ", " + ioe);
 			}
 		}
 
+		i = 0;
 		try {
-			warn("BOB is now running.");
+			info("BOB is now running.");
 			ServerSocket listener = new ServerSocket(Integer.parseInt(props.getProperty(PROP_BOB_PORT)), 10, InetAddress.getByName(props.getProperty(PROP_BOB_HOST)));
 			Socket server;
 
@@ -219,7 +231,7 @@ public class BOB {
 				t.start();
 			}
 		} catch(IOException ioe) {
-			warn("IOException on socket listen: " + ioe);
+			error("IOException on socket listen: " + ioe);
 			ioe.printStackTrace();
 		}
 	}