+
+
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
-
I2P Anonym Webbserver
-
Snabb vägledning till anonym webbservning på I2P
-
Det här är din eepsite, din egen anonyma I2P-webbserver - redigera bara filerna
- under ~/.i2p/eepsite/docroot/ (Linux),
- %LOCALAPPDATA%\I2P\eepsite\docroot\ (Windows),
- eller /Users/(user)/Library/Application Support/i2p (Mac),
- så kommer andra kunna nå dem efter att du följt instruktionerna nedan.
- I I2P så adresseras eepsajter med en 'nyckel', som representeras som en väldigt lång Base64-sträng.
- ('Nyckeln' är något så när analog med en IP-adress och visas
- på eepsajtens I2PTunnel-konfigurationssida).
- Nedan ges instruktioner om hur du kan ange ett namn som "minsajt.i2p" till din nyckel och börja köra din eepsajt.
-
Du kan nå din eepsajt lokalt via
- http://127.0.0.1:7658/.
-
+
I2P anonym webbserver
-
Att sätta upp och annonsera din eepsajt
-
Din eepsajt är stoppad som standard.
- Efter att du startat den kommer det att vara svårt för att andra att hitta den,
- eftersom den inte har ett namn och de inte känner till din mycket långa Base64-nyckel.
- Du skulle bara kunna berätta för andra om den långa nyckeln, men tacksamt nog har i2p en
- adressbok och många enkla sätt att berätta för folk om din eepsajt. Här är alla stegen.
-
- - Välj ett namn åt din eepsajt (ettbranamn.i2p). Små bokstäver.
- Kanske vill du först kolla i
- din routers adressbok,
- eller i filen
i2p/hosts.txt för att se om ditt tilltänkta namn redan är taget.
- Skriv in namnet för din eepsajt på
- eepsitekonfigurationssidan för i2ptunnel
- där det står "Website name". Detta kommer att ersätta det förinställda "mysite.i2p".
- När du är där, kryssa i "Auto Start"-rutan. Din eepsajt kommer nu att starta varje gång som du startar
- din router.
- Tryck sedan på "Save".
- - Klicka på startknappen för din eepsajt på
- huvudkonfigurationssidan för i2ptunnel.
- Du borde nu kunna se "eepsite" listad under "Local Destinations" på vänster sida om
- I2P Router Console.
- Din eepsajt kör nu.
- - Markera hela "Local destination"-nyckeln på
- eepsitekonfigurationssidan för i2ptunnel
- och kopiera den för att senare klistra in den.
- Säkerställ att du får med hela texten - det är mer än 500 bokstäver.
- - Skriv in namnet och klistra in destinationsnyckeln i din
- huvudadressbok.
- Klicka på "Add" för att lägga till destinationen i din adressbok.
-
- I din webbläsare, skriv in ditt eepsajtnamn (ettbranamn.i2p) så borde du landa på den här sidan igen.
- Förhoppningsvis fungerade det.
- - Innan du berättar för världen om den nya eepsajt borde du lägga till lite innehåll.
- Gå till
~/.i2p/eepsite/docroot/ (Linux),
- %LOCALAPPDATA%\I2P\eepsite\docroot\ (Windows),
- eller /Users/(user)/Library/Application Support/i2p (Mac),
- och ersätt omdirigeringssidan index.html med ditt eget innehåll. Virtuella mappar fungerar, så du kan serva filer från en
- underkatalog utan att behöva ge en sida med länkar till filer. Om du behöver en mall för en enkel sajt så
- varsågod och låna och anpassa
- denna sida och det här innehållet!
-
-
Registrera din egen .I2P-domän
-
Nu är det dags att lägga till din eepsajt till en I2P-adressbok som hostas på en sajt
- som stats.i2p.
- Alltså, du måste skriva in namn och nyckeln på din eepsajt i ett webbgränssnitt på
- en eller flera av dessa sajter.
- Här är nyckelinmatningsformuläret hos stats.i2p.
- Återigen, din nyckel är hela "Local destination"-nyckeln på
- eepsite-konfigurationssidan för i2ptunnel.
- Säkerställ att du får med hela texten.
- Glöm inte att klicka på "add a key".
- Kolla att den rapporterar att nyckeln lagts till.
- Eftersom många routrar periodiskt skaffar adressboksuppdateringar från dessa sajter
- så kommer andra att kunna finna din eepsajt inom ett antal timmar, bara genom att
- skriva ettbranamn.i2p i sin webbläsare.
-
Att prenumerera på adressböcker
-
På tal adressboksuppdateringar, nu vore en bra tidpunkt att lägga till några fler adressböcker
- till din egen
- prenumerationslista.
- Gå till din prenumerationsinställningssida och lägg till ett par av de här för en automatiskt uppdaterad
- lista över nya hosts:
-
- Om du har bråttom och inte kan vänta ett par timmar så kan du säga åt folk att använda en "jump"-adresshjälpar-
- omdirigeringstjänst.
- Detta kommer att funka inom ett par minuter efter att du skrivit in nyckeln i en adressbok på samma sajt.
- Prova först själv genom att skriva:
-
http://stats.i2p/cgi-bin/jump.cgi?a=ettbranamn.i2p eller
- http://i2host.i2p/cgi-bin/i2hostjump?ettbranamn.i2p
- i din webbläsare.
- Så snart som det funkar kan du berätta för andra att de ska använda det.
- - Vissa människor kolla på eepsajtlistor som
- inproxy.tino.i2p/status.php eller perv.i2p efter nya eepsajter,
- så att du kan börja få ett par besökare. Men det finns massor av sätt att berätta för folk.
- Här är en rad idëer:
-
-
Notera att vissa sajter rekommenderar att du klistrar in den verkligt
- långa destinationsnyckeln. Det kan du om vill - men om du har framgångsrikt har skickat din
- nyckel, testat den med en "hopptjänst", och väntat 24 timmar på att adressboken ska börja
- propagera sina ändringar till andra, så det borde inte vara nödvändigt.
-
Vidare assistans
-
- Ifall du har några frågor, så finns följande ställen för support:
-
-
- - Vår IRC-supportkanal:
-
-
-
Note: This page, the website and the console all need translating into YOUR language if it's not already been done or in progress. Please consider helping the project grow by
volunteering your time to translate. Contact the project via the IRC channel listed above. Thanks in advance!
-
+
Guide till anonyma webbserver på I2P
+
+
Detta är din egen anonyma I2P-webbserver (traditionellt kallad en eepsida).
+ För att betjäna ditt eget innehåll, redigerar du bara filerna i webbserverens rotkatalog så kommer webbplatsen att vara offentlig när du följer instruktionerna nedan.
+
+
Webbserverns rotkatalog finns på en av följande platser, beroende på ditt operativsystem:
+
+
+-
+Linux
+ Standardinstallation: ~/.i2p/eepsite/docroot/
+ Paketinstallation, körs som en tjänst: /var/lib/i2p/i2p-config/eepsite/docroot/
+
+ -
+Windows
%APPDATA%\I2P\eepsite\docroot\
+
+ -
+Mac
/Users/(user)/Library/Application Support/i2p
+
+
+
In I2P, hidden services are addressed using a Base32 address ending in ".b32.i2p", or a Destination represented as a long Base64 string.
+ The Base32 address may be used as a hostname, until you assign a register a name following the instructions below.
+ The Destination is somewhat like an IP address, and is shown on the Hidden Service Configuration page.
+
+
Instruktionerna nedan beskriver hur du tilldelar ett namn som "minsida.i2p" till din webbplats och möjliggör åtkomst för andra.
+ Du kan nå din webbplats lokalt via http://127.0.0.1:7658/.
+
+
Så här ställer du in och annonserar din dolda tjänst
+
+
Your webserver is running by default, but is not accessible by others until you start the hidden service tunnel.
+ After you start your I2P Webserver tunnel, it will be difficult for other people to find
+ It can only be accessed with the long Destination or with the shorter Base32 address (.b32.i2p), which is a hash of the Destination.
+ You could just tell people the Destnation or the Base32 address, but thankfully I2P has an address book and several easy ways to tell people about your website.
+ Here are detailed instructions.
+
+
+- Pick a name for your website (something.i2p), using lower-case.
+ You may wish to check first in your own router's address book to see if your name is already taken.
+ Enter the new name for your website on the Hidden Service Configuration page where it says "Website name".
+ This will replace the default "mysite.i2p".
+ Also, if you would like your I2P Webserver tunnel to be automatically started when you start I2P, check the "Auto Start" box.
+ Your website will now start every time you start your router.
+ Be sure to click "Save".
+ - Click the start button for your webserver tunnel on the main Hidden Service Manager page.
+ You should now see it listed under "Local Tunnels" on the left side of the I2P Router Console.
+ Your website is now running.
+ - Highlight and copy the entire Local destination on the Hidden Service Configuration page.
+ Make sure you copy the whole thing, it is over 500 characters.
+ - Enter the name and paste the destination into your address book.
+ Click "Add" to save the new entry.
+ - In your browser, enter in your website name (something.i2p) and you should be right back here.
+ Hopefully it worked!
+ - Before you tell the world about your new website, you should add some content.
+ Go to the server's root directory listed above and replace the index.html redirect page with your own content.
+
+
Directory listings are enabled, so you may host files from a subdirectory without providing a page with links to the files.
+ You may change the appearance of the directory by supplying an edited jetty-dir.css file for each directory.
+ The lib subdirectory demonstrates a custom style.
+ The resources subdirectory demonstrates the default style.
+ If you need a template for a basic site, feel free to adapt this page and associated content.
+
+
Om du kommer tillbaka till den här sidan efter att du har redigerat innehållet kan du försöka rensa webbläsarens webbcache:
+
+
+-
+Firefox: Preferences ➜ Advanced ➜ Network ➜ Cached Web Content ➜ Clear Now
+ -
+Chrome/Chromium: Settings ➜ Advanced Settings ➜ Privacy ➜ Clear browsing data
+ -
+Opera: Settings ➜ Privacy ➜ Clear browsing data
+
+
Registrera din egen I2P-domän
+
+
Now it is time to add your website to an I2P address book hosted by a site such as stats.i2p or no.i2p.
+ You must enter your website name and Destination (or Registration Authentication string) on one or more of these sites.
+
Some registration sites require the Destination.
+ If so, highlight and copy the entire Local destination on the Hidden Service Configuration page.
+ Make sure you copy the whole thing, it is over 500 characters.
+
Some registration sites, including stats.i2p, require the Registration Authentication string.
+ It is found on the Registration Authentication page linked from the Hidden Service configuration page.
+ Copy the entire authentication string and paste it on the registration page.
+ Make sure you copy the whole thing, it is over 500 characters.
+ Describe your site briefly if the site requests this information.
+ If your site is a HTTP service, leave the checkbox selected; if not, unselect it.
+
For all registration sites, read through the Terms of Service carefully.
+ Click the "Submit" button.
+ Verify the submission was successful.
+ Since many routers periodically get address book updates from these sites, within several hours others will be able to find your website by simply entering your hostname in their browser.
+
+
Lägga till prenumerationsadressbok
+
+
Speaking of address book updates, this would be a good time to add some more addressbooks to your own subscription list.
+ Go to your Subscriptions Configuration page and add one or more for an automatically updated list of new hosts:
+
+
+-
+
http://stats.i2p/cgi-bin/newhosts.txt (stats.i2p)
+ -
+
http://no.i2p/export/alive-hosts.txt (no.i2p)
+
+
If you are in a hurry and can't wait a few hours, you can tell people to use a "jump" address helper redirection service.
+ This will work within a few minutes of your registering your hostname on the same site.
+ Test it yourself first by entering http://stats.i2p/cgi-bin/jump.cgi?a=something.i2p into your browser.
+ Once it is working, you can tell others to use it.
+
+
Some people check website lists such as Identiguy's eepsite status list or no.i2p's active host list for new eepsites, so your site may start getting some traffic.
+ There are plenty of other ways to tell people. Here are a few ideas:
+
+
+- Posta ett meddelande på I2P-forum för att berätta för alla om din nya I2PS-webbplats!
+ - Berätta för folk om det på kanalerna #i2p- eller #i2p-chat på IRC.
+ - Sätt det på I2PWiki eepsidsindexet
+
+
+
Observera att vissa sidor rekommenderar att du klistrar in den riktigt långa destinationen.
+ Du kan om du vill, men om du framgångsrikt har registrerat ditt värdnamn på en registreringstjänst, testat det med hjälp av en hopptjänst och väntat 24 timmar på att adressboksuppdateringen ska spridas till andra, borde det inte vara nödvändigt.
+
+
Använda en alternativ webbserver för att vara värd för din webbplats
+
+
This site (and the I2P router console) is running on the Jetty webserver, but you may wish to use a different webserver to host your content.
+ To maintain anonymity, be sure that your webserver is configured to only allow connections from localhost (127.0.0.1), and check the documentation to ensure your webserver isn't advertising details that may compromise your anonymity.
+
+
To configure your webserver for use on I2P, you may either use the existing webserver tunnel and disable the default webserver from running, or create a new HTTP Server tunnel in the Hidden Services Manager.
+ Ensure that the listening port configured for the webserver (7658 by default) is also configured in the Hidden Services settings.
+ For example, if your webserver is listening by default on address 127.0.0.1 port 80, you'd need to also ensure that the Target port in the Hidden Service Manager settings page for the service is also configured to port 80.
+
+
Beware that a poorly configured webserver or web appplication can leak potentially compromising information such as
+ your real IP address or server details that may reduce your anonymity or assist a hacker.
+ We recommend using the default server unless you feel comfortable doing server administration.
+ Please ensure your web server is secure prior to placing it online.
+ There are plenty of guides online, for example if you search for "nginx security hardening guide" you will find a number of guides that have good recommendations.
+
+
There is one important issue with the Apache web server.
+ The mod_status and mod_info Apache modules are enabled by default on some operating systems.
+ These modules expose internal data which can lead to serious compromise of anonymity when used on an anonymous network.
+ Removing the lines in the configuration file where these modules are loaded is the easiest way to prevent these issues.
+
+
Ytterligare hjälp
+
+
Om du har några frågor finns följande platser tillgängliga för support:
+
+
+
+
Denna sida, projektwebbplatsen och routerkonsolen behöver översättningar!
+ Hjälp projektet att växa med
att bli involverad eller
översätta.
+
-
+
diff --git a/installer/resources/eepsite/docroot/help/index_uk.html b/installer/resources/eepsite/docroot/help/index_uk.html
new file mode 100644
index 000000000..6c4d9a453
--- /dev/null
+++ b/installer/resources/eepsite/docroot/help/index_uk.html
@@ -0,0 +1,183 @@
+
+
+
+
+
+
+
+
Анонімний Веб-Сервер I2P
+
+
Керівництво для Анонімної Web Сервіровки на I2P
+
+
This is your own anonymous I2P webserver (traditionally referred to as an eepsite).
+ To serve your own content, simply edit the files in the webserver's root directory and the site will be public once you follow the instructions below.
+
+
The webserver's root directory can be found in one of the following locations, depending on your operating system:
+
+
+-
+Linux
+ Standard install: ~/.i2p/eepsite/docroot/
+ Package install, running as a service: /var/lib/i2p/i2p-config/eepsite/docroot/
+
+ -
+Windows
%APPDATA%\I2P\eepsite\docroot\
+
+ -
+Mac
/Users/(user)/Library/Application Support/i2p
+
+
+
In I2P, hidden services are addressed using a Base32 address ending in ".b32.i2p", or a Destination represented as a long Base64 string.
+ The Base32 address may be used as a hostname, until you assign a register a name following the instructions below.
+ The Destination is somewhat like an IP address, and is shown on the Hidden Service Configuration page.
+
+
The instructions below detail how to assign a name like "mysite.i2p" to your website and enable access by others.
+ You may reach your site locally via http://127.0.0.1:7658/.
+
+
How to set up and announce your hidden service
+
+
Your webserver is running by default, but is not accessible by others until you start the hidden service tunnel.
+ After you start your I2P Webserver tunnel, it will be difficult for other people to find
+ It can only be accessed with the long Destination or with the shorter Base32 address (.b32.i2p), which is a hash of the Destination.
+ You could just tell people the Destnation or the Base32 address, but thankfully I2P has an address book and several easy ways to tell people about your website.
+ Here are detailed instructions.
+
+
+- Pick a name for your website (something.i2p), using lower-case.
+ You may wish to check first in your own router's address book to see if your name is already taken.
+ Enter the new name for your website on the Hidden Service Configuration page where it says "Website name".
+ This will replace the default "mysite.i2p".
+ Also, if you would like your I2P Webserver tunnel to be automatically started when you start I2P, check the "Auto Start" box.
+ Your website will now start every time you start your router.
+ Be sure to click "Save".
+ - Click the start button for your webserver tunnel on the main Hidden Service Manager page.
+ You should now see it listed under "Local Tunnels" on the left side of the I2P Router Console.
+ Your website is now running.
+ - Highlight and copy the entire Local destination on the Hidden Service Configuration page.
+ Make sure you copy the whole thing, it is over 500 characters.
+ - Enter the name and paste the destination into your address book.
+ Click "Add" to save the new entry.
+ - In your browser, enter in your website name (something.i2p) and you should be right back here.
+ Hopefully it worked!
+ - Before you tell the world about your new website, you should add some content.
+ Go to the server's root directory listed above and replace the index.html redirect page with your own content.
+
+
Directory listings are enabled, so you may host files from a subdirectory without providing a page with links to the files.
+ You may change the appearance of the directory by supplying an edited jetty-dir.css file for each directory.
+ The lib subdirectory demonstrates a custom style.
+ The resources subdirectory demonstrates the default style.
+ If you need a template for a basic site, feel free to adapt this page and associated content.
+
+
If you're returned to this page after editing the content, try clearing your browser's web cache:
+
+
+-
+Firefox: Preferences ➜ Advanced ➜ Network ➜ Cached Web Content ➜ Clear Now
+ -
+Chrome/Chromium: Settings ➜ Advanced Settings ➜ Privacy ➜ Clear browsing data
+ -
+Opera: Settings ➜ Privacy ➜ Clear browsing data
+
+
Register your own I2P Domain
+
+
Now it is time to add your website to an I2P address book hosted by a site such as stats.i2p or no.i2p.
+ You must enter your website name and Destination (or Registration Authentication string) on one or more of these sites.
+
Some registration sites require the Destination.
+ If so, highlight and copy the entire Local destination on the Hidden Service Configuration page.
+ Make sure you copy the whole thing, it is over 500 characters.
+
Some registration sites, including stats.i2p, require the Registration Authentication string.
+ It is found on the Registration Authentication page linked from the Hidden Service configuration page.
+ Copy the entire authentication string and paste it on the registration page.
+ Make sure you copy the whole thing, it is over 500 characters.
+ Describe your site briefly if the site requests this information.
+ If your site is a HTTP service, leave the checkbox selected; if not, unselect it.
+
For all registration sites, read through the Terms of Service carefully.
+ Click the "Submit" button.
+ Verify the submission was successful.
+ Since many routers periodically get address book updates from these sites, within several hours others will be able to find your website by simply entering your hostname in their browser.
+
+
Adding Addressbook Subscriptions
+
+
Speaking of address book updates, this would be a good time to add some more addressbooks to your own subscription list.
+ Go to your Subscriptions Configuration page and add one or more for an automatically updated list of new hosts:
+
+
+-
+
http://stats.i2p/cgi-bin/newhosts.txt (stats.i2p)
+ -
+
http://no.i2p/export/alive-hosts.txt (no.i2p)
+
+
If you are in a hurry and can't wait a few hours, you can tell people to use a "jump" address helper redirection service.
+ This will work within a few minutes of your registering your hostname on the same site.
+ Test it yourself first by entering http://stats.i2p/cgi-bin/jump.cgi?a=something.i2p into your browser.
+ Once it is working, you can tell others to use it.
+
+
Some people check website lists such as Identiguy's eepsite status list or no.i2p's active host list for new eepsites, so your site may start getting some traffic.
+ There are plenty of other ways to tell people. Here are a few ideas:
+
+
+- Post a message on the I2P forum telling everyone about your new I2P website!
+ - Розкажіть людям про це на каналах # i2p або # i2p-chat на IRC.
+ - Put it on the I2PWiki Eepsite Index
+
+
+
Note that some sites recommend pasting in that really long destination.
+ You can if you want, but if you have successfully registered your hostname on a registration service, tested it using a jump service, and waited 24 hours for the address book update to propagate to others, that shouldn't be necessary.
+
+
Using an alternative webserver to host your site
+
+
This site (and the I2P router console) is running on the Jetty webserver, but you may wish to use a different webserver to host your content.
+ To maintain anonymity, be sure that your webserver is configured to only allow connections from localhost (127.0.0.1), and check the documentation to ensure your webserver isn't advertising details that may compromise your anonymity.
+
+
To configure your webserver for use on I2P, you may either use the existing webserver tunnel and disable the default webserver from running, or create a new HTTP Server tunnel in the Hidden Services Manager.
+ Ensure that the listening port configured for the webserver (7658 by default) is also configured in the Hidden Services settings.
+ For example, if your webserver is listening by default on address 127.0.0.1 port 80, you'd need to also ensure that the Target port in the Hidden Service Manager settings page for the service is also configured to port 80.
+
+
Beware that a poorly configured webserver or web appplication can leak potentially compromising information such as
+ your real IP address or server details that may reduce your anonymity or assist a hacker.
+ We recommend using the default server unless you feel comfortable doing server administration.
+ Please ensure your web server is secure prior to placing it online.
+ There are plenty of guides online, for example if you search for "nginx security hardening guide" you will find a number of guides that have good recommendations.
+
+
There is one important issue with the Apache web server.
+ The mod_status and mod_info Apache modules are enabled by default on some operating systems.
+ These modules expose internal data which can lead to serious compromise of anonymity when used on an anonymous network.
+ Removing the lines in the configuration file where these modules are loaded is the easiest way to prevent these issues.
+
+
Додаткова Допомога
+
+
Якщо ви маєте питання, тут можна дістати підтримку:
+
+
+
+
This page, the project website and the router console need translations!
+ Please help the project grow by
getting involved or
translating.
+
+
+
+
diff --git a/installer/resources/eepsite/docroot/help/index_zh.html b/installer/resources/eepsite/docroot/help/index_zh.html
index a18c3fd1b..d11460ec1 100644
--- a/installer/resources/eepsite/docroot/help/index_zh.html
+++ b/installer/resources/eepsite/docroot/help/index_zh.html
@@ -1,113 +1,183 @@
-
-
-
